canon mp495 wireless setup without cable

#Canon mp495 wireless setup without cable manuals
#Canon mp495 wireless setup without cable install
#Canon mp495 wireless setup without cable software

Ensure that you have an access point (sometimes referred to as a router or hub) via which you get an Internet connection.

#Canon mp495 wireless setup without cable install

Please now install the provided software.Before attempting to connect your PIXMA printer to your wireless network, please check that you meet the following two conditions: This concludes the Wi-Fi setup procedure.

Once connected, the following screen will appear.

Once you have finished entering the passphrase, press the button. If you accidentally make a mistake, you can delete the character by pressing the key. If you have 2 characters contained within the same button, press the arrow key to advance to the next character.

This is displayed in top right of screen.įor example, in the uppercase mode, pressing the button once will give you 'A' and pressing the button twice will give you 'B' etc. Press the button to switch to the uppercase mode ( A), lowercase mode ( a), or numeric mode (1).

The machine has three input modes: uppercase mode, lowercase mode, and numeric mode. When the following screen appears, use the numeric buttons on the machine to enter the security passphrase of your wireless network.If you cannot see your network listed, use the arrow keys to select and press the button. If you are unsure of the name of your wireless network, it may be on a printed label on your access point, or you can check the network your computer is connected to. Use the arrow keys to select the name of your network (also referred to as SSID) and press the button twice.The printer will now search all available wireless networks in the immediate vicinity. Press the button and the following screen will be displayed, press the button.If the wireless setup is still failing after following this guide, please contact us for further assistance.

#Canon mp495 wireless setup without cable manuals

If you do not have the installation CD that came with your product, please download the manuals and software.

#Canon mp495 wireless setup without cable software

Please now proceed by installing the software to make the most out of your PIXMA MX495. When referring to the printout, check that the “Connection” indicates “Active” and that the SSID -Service Set Identifier (or the name of your wireless network) indicates the correct name of your wireless network. The network information page will be printed. Use the arrow button (C) to select and press the button.Load a sheet of A4 or Letter-sized plain paper.Make sure that your printer is turned on.To confirm that your printer is successfully connected to your wireless network, you can print out the network settings of your printer if you wish: If another screen appears, please refer to “troubleshooting” in the user guide. Once connected, the following screen will appear. Press the button on the printer within 2 minutes.Press and hold the button on your access point for approximately 5 seconds, then release.įor exact instructions on starting WPS on your access point, please refer to its user guide.The following message will be displayed on the printer’s screen “Press WPS button of the wireless router about 5 sec. The printer will now automatically search for access points supporting the WPS feature.Use the arrow buttons (C) to select and press the button.Most WPS enabled access points use this protocol. Your network must be using the WPA (Wi-Fi Protected Access) or WPA2 security protocol. If the WPS push button is not available please use the instructions in the Standard Connection Method. The access point must have a physical WPS push button available. Please check with your device’s user guide for details. Before we start, there are some conditions that must be met in order to use the WPS push button method: